Everyday concrete
Broom-finished and smooth slabs, exposed aggregate, driveways, sidewalks, steps, and commercial pads. We inspect wear and joints, choose suitable equipment, and finish edges and corners.
Hard surfaces
Driveway & Concrete Pressure Washing in Jacksonville, FL
When the surface can handle it, we use the right pressure and a surface cleaner — not a wand that leaves zebra stripes.
FROM THE DRIVEWAY TO THE WALKWAY
Every surface.
A cleaner first impression.
Explore concrete finishes and see inside a HydroScrubber surface cleaner. Your driveway, sidewalks, patios, and pool deck each start with a look at the surface and its condition.
BEFORE
AFTER
Decorative & coated surfaces
Stamped, colored, stained, sealed concrete and textured pool-deck coatings need care for the finish. We check the coating and product guidance before choosing cleaners and pressure.
Specialty surfaces
Pervious concrete needs a maintenance plan that protects its drainage function. Deep oil, rust, and other stains may need specific treatment; permanent discoloration and damage can remain.
Have pavers? Explore sanding & sealing →REAL SAFE TOUCH WORK
See the clean in motion.
Watch Safe Touch at work, then send us photos of the areas you want cleaned. We look at material, finish, access, and staining before quoting.
Request your concrete cleaning quote →Concrete and some stone want mechanical cleaning. We use a surface cleaner so the driveway finishes even, then treat rust, fertilizer stains, and tire marks that water alone will not move.
If the driveway is pavers, that is a different job — see paver sealing. Mixing the two is how homeowners end up with washed-out joints and a sealer that fails in a season.
Residential pressure washing is usually quoted with the house and roof so the whole elevation matches. One crew, one visit, one walkthrough.
- Driveways, sidewalks, and concrete pads
- Pool decks and cool decking
- Fences, retaining walls, and steps
- Rust, oxidation, and oil-stain treatment
Residential Pressure Washing cost in Jacksonville
Concrete is quoted by square footage and how much staining has to be treated. Ranges below are typical, not a bid.
| Job | Typical range | Notes |
|---|---|---|
| Driveway | $150–$400 | Rotary surface cleaner for an even finish. |
| Sidewalk / walkway | $100–$250 | Often bundled with the driveway. |
| Pool deck / cool deck | $175–$450 | Paver decks are priced as paver work instead. |
| Rust, tannin, or oil treatment | Adds to base | Fertilizer and irrigation rust take a separate treatment. |
Request
Tell us the address.
We call back with questions, then send a written number. No surprise add-ons after the crew is already in the driveway.
Get your free estimate from Chuck.
Call or email your property address, the surfaces you need cleaned and any photos. Chuck will reply with the next step.
Call (904) 434-1108Email ChuckConcrete can take pressure. It still has to be done right.
Concrete is the one surface where real pressure belongs, and even then, technique is the job. A wand in the wrong hands etches lines into a driveway that never come out. The marks show up six weeks later, after the concrete dries out, and by then the guy with the wand is long gone.
We run a rotary surface cleaner on flatwork because it keeps the pressure even and the pattern consistent. Edges get hand work so the cut lines match. And we treat the stains concrete actually has in Florida: rust from irrigation, tannin from the oak canopy, the black algae film that makes a five-year driveway look twenty.
Rust, tannin, and the stains that don't rinse off
Plain water doesn't touch irrigation rust. It needs a targeted treatment, done before the general wash, or the rust just moves around. Oak tannin is the same story. If your driveway has both, the job is chemistry plus pressure in the right order, and any quote that treats it as a quick rinse is a quote for half a job.
Google checked October 7, 2026; Angi checked August 2026. These are two separate listings, not a combined total. Read the reviews.
Questions about residential pressure washing
How much does pressure washing cost in Jacksonville?+−
Driveways often run $150–$400. House washes $250–$850. Full packages $800–$2,000+. Send the address for a written number.
Will pressure washing remove rust and fertilizer stains?+−
Plain water will not. Irrigation rust, fertilizer, and oak tannin need a separate treatment. We identify the stain type before quoting so you are not paying for a wash that will not move it.
Will a surface cleaner leave zebra stripes on my driveway?+−
No. We use a rotary surface cleaner rather than a single wand tip, so the driveway finishes with an even pattern instead of overlapping stripes. This is the same reason we do not pressure wash a house or roof.
Can you clean the driveway and the house the same day?+−
Yes. Concrete gets pressure and a surface cleaner; the house and roof get soft wash. Most full-property visits include both in one trip.
Other work we do
Paver Cleaning, Sanding, and Sealing
Clean, re-sand, and seal driveways, pool decks, and patios so they last in Florida weather.
View
Residential Soft Wash
Low-pressure house washing that removes algae without scarring siding, stucco, or paint.
View
Pool Cage & Screen Enclosure Cleaning
Low-pressure cleaning for Florida pool cages, lanais, screens, frames, and the hardscape inside them.
View